AutomotiveTouchup catalogs the largest paint color selection for your 2010 Maybach 62

HOME > TOUCH UP PAINT > MAYBACH > 2010 > CHOOSE COLOR

Select Your Paint Color for your 2010 Maybach 62

ChipColor CodesColor Description
9161, 161
Baltic Black
8-491, 8491, 491
Rocky Mountain Dark Brown Meta
588, 3-588, 3588
Ayers Rock Red Metallic
697, 1697, 1-697
Rocky Mountain Brown Middle Me
721
721
Nevada Silver Metallic
7-725, 725, 7725
Himalayas Gray Dark Metallic
9766, 766, 9-766
Nayarit Silver Metallic
7770, 7-770, 770
Himalayas Gray Bright Metallic
7773, 7-773, 773
Tierra Del Fuego Bright Metall
9780, 9-780, 780
Alaska White
808, 6808, 6-808
Ireland Green Dark Metallic
6-886, 886, 6886
Ireland Green Middle Metallic
9-972, 972, 9972
Caspian Black Metallic
975, 9975
Caspian Black Metallic

CLEAR COAT IS REQUIRED WITH THIS PAINT

To ensure your paint repair blends in perfectly, you'll need to apply a clear coat over the color coat. While AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2010 Maybach 62, we use the same basecoat/clearcoat system as your factory specs. You can add a clear coat to your order on the next step.

Don't see your color listed?


Call 1-999-999-9999
We probably have it.

Did you choose the wrong vehicle model?


Did you choose the wrong model? How about the 2010 Maybach 57, 57S, or 62s?  If you're still not sure, take a look at our All 2010 Maybach Models page.  Or, just go to our page dedicated to Maybach Touch Up Paint

Why The Two-Step Paint System?

Your 2010 Maybach 62 is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Jerry G, owner of a 1979 Chevrolet from Dekalb, IL

Good seller AAAAAA++++++++

Mark S, owner of a 2001 Dodge Durango from Belfair, WA

Wow! I was afraid a bit, but excellent. Original owner left tape on the rear window too long and it bled into the clear coat. I watched the how to video's on YouTube and felt confident to make the fix. Masking product (tape and plastic) amazing. Masked off the whole area around the fender. Blended 3 base coats then followed it up after 40 minutes with 3 clear coats. I think I would of liked one more can of clear coat, but all and all it came out great. Original owner knocked off a lot of the sales price due to this problem, and it was fixed for $30 and a little elbow grease. I'd feel confident doing this to any other car or incident that pops up in the future. Very important to follow up your heavier sanding with 600 grit, with 1000 then 1500 to cut out fine lines. Watch the videos and you can't go wrong. Patience is key, can't rush the paint or the trying process. https://www.icloud.com/photostream/#A1JtdOXmzurY3 Thanks, Mark

Share your touch up story...